Universal Mounting Pole Kit

Does what it says.

Excellent addition to the setting up of our weather station. Very sturdy and strong, offers the perfect extension to give height to the weather station.

I would definitely recommend including rhe mountin pole with your purchase for a strong and purpose build pole to add height to your mounting it also feels a much more secure attachment than the plastic mounting on most wearher stations

Does what is meant to.

the pole diameter is too small for the aray to clamp to and I feel its over priced as I had to turn a sleve to mount the aray

Ideal good product with all the appropriate fixings.

Does the job perfectly

Adequate, easy to fix in place. Unfortunately had to be returned as weather station did not work.

Looks purpose built for the job. Time will tell if any of the parts start to corrode.

Easy to fix

does what it is supposed to do

£20 WASTED

Good kit.

Yep - this certainly helped with the installation of the Sensor unit

This made putting up the weather centre much easier than trying to attach it to a fence.

Easy to use

Great sturdy pole and looks 👍

Many thanks

Very tricky getting the station exactly horizontal on to a pole which has to be exactly vertical!

A useful accessory for the weather station, however the rod is not a good fit for the Weather Station mounting bracket, also the metal tube distorts if too much pressure is put on it.

It arrived promptly. Shorter in length than I imagined but it was the length specified. Thought this one-piece pole would be more stable in high winds than the Davis two-piece equivalent and think experience has proved me right. Very good quality mounting bracket and substantial 4 fixing screws - wondered if the fence post they were going to be screwed into was sturdy enough but it was. Perhaps I drilled the pilot holes with too small a drill bit but always wary of making them too big and screws then not holding properly. Once mounted it is very solidly affixed although top of pole & Davis Vantage Vue does still shake a bit in gale force winds, affecting rain gauge in the process!

One piece of advice - make sure you have the correct sizes of spanners/ring spanners/socket set before starting to mount the pole. I had to go search out mine only to discover the 1/2" socket was missing from the socket set. A ring spanner sufficed once I got the screws aligned into their pilot holes but the socket set would have been far less effort.

All in all a worthwhile purchase and a sturdy piece of kit.

Early days yet looks ok we will see

Very stable pole makes setting up easy.

perfect fit on the side of a shed to give and ideal spot for the sensors

Easy to install and to mount the Weather Station.

I had to turn the mounting bracket around back to front to allow it to fix to my wall. Even though i fixed it so the station was above my roof edge, the bracket was not deep enough so the pole would go past my barge board. I also had to flatten the round pole slightly so that the mounting bracket clamp would grip properly on it.

The station pole does not fix securely to the mounting pole so i had to fix a tek screw through it to stop it spinning.

OK but a bit clunky and tricky to put up - I drilled holes in the post I was using. Would be a lot easier with two people. Could be a bit more rigid.

Hole in weather-station Oval, post is round.

Head scratching and workshop to make it fit - somehow.

Very good for holding the weather station in the place I required it to be. Easy assembly and fitting together perfectly. Made everything easy to install the weather station.

Can’t say any better than it does what it’s supposed to do. Fitting straightforward and impressived with the various fittings provided. We’ve had gale force winds today courtesy of storm Betty and it looked stable with very little flexing.

Does what it says!

Does what it says!